Baldwin DRS6-2-1000

Baldwin CNW #5000A DRS6-2-1000


Note: This is not a 'How To', but a display of a completed 'Scratchbuilt Project' showing what can be done with some materials and time. It does not have to have been judged for AP Points.


 

Nov 23, 2004
Roger,
The attached photos are of my Baldwin CNW #5000A DRS6-2-1000 built using left over parts from 2 AHM E8/9s that I had from building a E8 "B" unit several years ago. A friend of mine had seen the body laying in a "future projects to complete" box and said if I would finish the body he would build the power chassis. I used the drawings from the CNWHS magazine of several years ago, and he use a P2K PA chassis that he extended to fit.

We had a lot fun building this engine as it was a one of a kind from Baldwin. It will pull a ton of cars.

If you can use in this section of the NMRA site, Thanks.

Al Erdmann

 


If you wish to submit a photo for consideration, send the photo (no larger than 800x600 please) to TJ Klevar along with a description of how you built it, techniques you used, and any special tips you wish pass along.